Products

Products

Home > Our Products > Aluminium Sulphate

Calcium Hypochlorite
Stable Bleaching Powder
Aluminium Sulphate
Monochloric Acetic Acid
Sulphuric Acid
Chlorosulphonic acid
Hydrochloric Acid
Oleum
Why Aquafit
Hydrogen gas

Aluminium Sulphate

1	Aluminium AS (A1203) (% By Wt) Max	17.0 % (MIN)
2	Iron (AS FE) (% By Wt) Max	0.01%
3	PH (Of 5% Solution) Not Less Than	2.80.
4	Insoluble matter (% By Wt) Max	0.30%

Available In Following Physical Forms:

Lumps / Kibbled
Powder
Granules

Download Specifications

Click here to download Material Safety Data Sheet (MSDS)

As mordant in the dyeing of textiles.
As a loading material for better grades of paper.
For clarifying oils and fats in the preparation of Aluminium residents and other pure Aluminium salts.
In large quantities as a coagulant for purification of water.
For injection in the cell bearing formation for pressure maintenance.
Pure grade of the materials are used for pharmaceutical preparation.
Used in fireproofing and waterproofing of cloth and concrete.
For dewatering and decolourising of petroleum products.
In anti-perspirants and agricultural pesticides.

Safety Data Sheet

1.Chemical Identity
Chemical Name	Aluminium Sulphate	Chemical Classification Inorganic Compound
Synonyms	Cake Alum.	Trade Name
Formula: AL2(SO4)3 18H2O	C.A.S.No. 10043-01-3	UN No. Not Listed.
Regulated Identification	Shipping Name	Hazardous Substance, Solid, N.O.S.Hazchem Code: Not Listed
	Codes / Label	Not Listed.
Hazardous Ingredients C.A.S.No. :	C.A.S.No.	Hazardous Ingredients:
Aluminium Sulphate	10043-01-3	3

2. Physical / Chemical Data
Boiling Pt / Range Not pertinent	C: Physical State Solid Vapour Pressure	Appearance: White Powder
Melting / Freezing Pt. Decomp. At 770 ‘C	@35’C Not available mm Hg Solubility	Odour: Odourless
Vapour Density Not Available (Air=1)	In water at 30 ‘C Soluble pH	Others Insoluble in Alcohol and Ether
Specific Gravity 1.7 at Water = 1) 20’C (Solid)		Not Pertinent

3. Fire / Explosion Hazard Data

Flammability NO

LEL Not Pertinent %

Flast Point ‘C Not Pertinent (OC)

TDG Flammability Not Listed

UEL Not Pertinent %

Flast Point ‘C Not Pertinent (OC)

Autoignition Temperature ‘C: Not Pertinent
Explosion Sensitivity to impact: Stable
Explosion Sensitivity to Static Electricity: Stable
Hazardous Combustion Products: Emis toxic fumes of Sox and Na2O
Hazardous Polymerization: Will not occur.

Combustible Liquid NO: Explosive Material NO.: Corrosive Material NO
Flammable Material NO: Oxidizer NO: Others
Pyrophoric Material NO: Organic Peroxide NO:

4. Reactivity Data
Chemical Stability	Stable
Incompatibility	Steam and Water.
With Other Material:
Reactivity: May corrode metals in presence of moisture. Hydrolyzes to form Sulphuric Acid. Hazardous: Not available Reaction products:

5. Health Hazard Data
Routes of entry:	Inhalation, Ingestion, Skin & Eyes.
Effects of:	Inhalation of dust irritates nose and mouth. Ingestion of large doses causes gastric irritation,
Exposure:	Nausea, vomiting, purging. Dust irritates eyes and skin.
Symptoms
Emergency:
Inhalation:	Rinse nose and mouth with water, Ingestion: Give large amounts of water,
Treatment	Eyes & Skin: Wash with plenty of water for 15 mins. Seek Medical Aid.
LD50 (Oral-Rat) Not Listed mg/Kg: STEEL Not Listed ppm Not Listed mg/m3 Permissible Exposure Limit Not Listed ppm Not Listed mg/m3: Odour Threshold Odourless ppm Odourless mg/m3 TLV (ACGIH) 0.14 ppm 2.0 mg/,3 NFPA Hazard: Health: Flammability: Reactivity: Special Signals: Not Listed: Not Listed: Not Listed:

6. Preventive Measures.
Personnel: Avoid Contact with solid or dust. Protective: Provide rubber gloves, Safety goggles, face shield, dust mask, all purpose cannister, and respirator. Equipment:
Handling & Storage Precautions:	Sore in a cool, dry and well-ventilated area.

7. Emergency / First Aid Measures
Fire	Fire Extinguishing	Not flammable, do not use water or fires.
	Media
	Special Procedure	Keep the containers cool by spraying water if exposed to heat or flame.
	Unusual Hazards	Poisonous gases are produced in fire.
Exposure	First Aid Measure	Inhalation: Remove the victim to fresh air and rinse nose and mouth with water. Ingestion: Give large amounts of water. Skin: Flush with water and Soap. Eyes: Flush with water for 15 mins. Seek medical aid.
	Antidotes / Dosages	Not available
Spills	Steps To be taken	Sweep and collect without making dust. Wash the area with water and soap.
	Waste Disposal Method.	Seal all waste in vapour tight plastic bags for eventual disposal.

8. Additional Information / References:
Moderately toxic by ingestion and intraperitoneal routes. Experimental reproductive effects. Hydrolyzes to form Sulphuric Acid that irritates tissues and lungs.
Manufacturers / Suppliers Data
Name Of Firm:	Contact Person:
Mailing Address:	In Emergency.
Telephone / Telex Nos.	Inhalation: Remove the victim to fresh air area and rinse nose and mouth with water. Ingestion: Give large amounts of water. Skin: Flush with water and Soap. Eyes: Flush with water for 15 mins. Seek medical aid.
Telegraphic Address	Local Bodies involved Standard Packing Team Card Details / Ref.

Disclaimer

Information contained in this material date sheet is believed to be reliable but no representation, guarantee or warranties of any kind are made as to its accuracy, suitability for a particular application or results to be obtained from them. It is up to the manufacturer / seller to ensure that the information contained in the material safety data sheet is relevant to the product manufactured / handled or sold by him as the case may be. The SRHHL makes no warranties expressed or implied in respect of the adequacy of this document for any particular purpose.